Kent Smoke & Fire Curtains
Kent Smoke and Fire Curtains is a British owned company with its base manufacturing set up in Dubai, helmed by a team which has been at the forefront of the industry for three decades almost. Based amidst most modern architectural structures of the world, we are perfectly set to meet the tight demands of the fast paced global construction industry. Kent smoke and Fire Curtains focusses on details to manufacture bespoke designs for fire protection encouraging a safer space for work or living.
Kent Smoke Curtains
The majority of deaths in a fire scenario are caused not by flame burns, but by the inhalation of hot smoke and toxic gases. As a fire develops, smoke can quickly fill the building, creating a chaotic situation where people are incapacitated and unable to access exit points.
Kent Smoke Curtains are used to control the movement of smoke through a building in the event of a fire. They can either channel smoke to smoke extraction points or create reservoirs to slow its spread. They remain virtually invisible when the curtain is stored in its retracted position within the compact headbox. When signaled by a local detector device or a fire alarm signal, they descend to the operational level above the floor.
FEATURES
CE Labelled D120
Fully tested to BS EN 12101-1 Annexes B,C and D
Compact ‘nearly invisible’ headbox with multiple fixing methods
Flexible and durable smoke impermeable fiberglass fabrics
Lightweight assembly that greatly lessens structural load
Guide rails not required but optional
Bottom bar, side guides and headbox can be powdercoated to blend in to surroundings
Achieve curved designs with segmented curtains
Virtually unlimited width without intermediate support
Kent Guaranteed Gravity Fail Safe (no power needed)
Intelligent controls
COMPLIANCE
BS EN 12101-1 Annex B (Reliability, Response Time and Material Durabilty)
BS EN 12101-1 Annex C (Air Leakage Test)
BS EN 12101-1 Annex D (Fire Resistance Test)
CE Labelled D120
THIRD PARTY ACCREDITATION- Certifire
Fabric tested to BS 476 Pt 6 and Pt 7, EN 13501-1
FIRE RESISTANCE (E)
120 minutes at 600 deg C
Kent Fire Curtains
Kent Fire Curtains are life safety systems that are designed to arrest the spread of fire in a building. The assembly comprises a fire resistant fiberglass fabric wound over a roller and all encased in a compact head box that is typically installed above the ceiling to be virtually invisible until activated.
When activated by either a general fire alarm or a local detector, the fire curtain descends from its holding position within the head box to its operational position (floor level) and thus forms a physical barrier for fire compartmentalization. Using the Kent Gravity Fail Safe System, our fire curtains descend without the need for power and are fail to safe systems. These fire curtains have enabled large open building designs where otherwise permanent fire rated partitions would be required.
FEATURES
Certified to BS EN 1634 Parts 1 and 3
E180 and E240 minute fire rated models
Compact ‘nearly invisible’ headbox with multiple fixing methods
Flexible and durable fire rated fiberglass fabrics
Lightweight assembly that greatly lessens structural load
Slim compact guides
Bottom bar, side guides and headbox can be powdercoated to blend in to surroundings
Up to 8.5m width x 7m drop on a single roller
Virtually unlimited width without intermediate support using mutliple rollers
Kent Guaranteed Gravity Fail Safe (no power needed)
Intelligent controls
COMPLIANCE
BS EN 1634-1:2014 (fire resistance)
BS EN 1634-3:2014 (smoke control test)
Fabrics tested to BS 476 Pt 6 and Pt 7, EN 13501-1
Fire Curtains tested to UL 10D
FIRE RESISTANCE (E)
E180 / E240
RADIATION PERFORMANCE (W)
60 minutes < 15kW/m2